Eagle Examples

The Micromint Eagle includes an extensive set of code examples to help you get started with your applications. This table summarizes the examples available for different models of the Eagle line. Our support staff (This email address is being protected from spambots. You need JavaScript enabled to view it. ) can assist you with questions on specific functions.

Example Description Eagle
100

Eagle
50E

Eagle
50

adc Analog to Digital Converter OK OK

OK

aes_expanded_key AES Pre-expanded Key OK OK OK
aes_set_key AES Normal Key OK OK OK
bitband Grouping bits together OK OK OK
blinky Blink on-board LED OK OK OK
boot_eth
Ethernet bootloader OK OK No
boot_serial
Serial bootloader OK OK OK
cpld_isa
Access PC/104 board OK No No
cpld_monitor
Monitor events in CPLD OK No No
cpld_update
Update CPLD firmware OK No No
cpld_xio LCD interfacing using Extended I/O OK No No
dac_ssi
Digital to Analog Converter OK(*) OK(*) OK(*)
enet_io
Control GPIOs using lwIP web server OK OK No
enet_lwip
Simple lwIP web server OK OK No
enet_ptpd
Precision Time Protocol using lwIP OK OK No
enet_snmp
Simple Network Management Protocol OK OK No
enet_tftpd
TFTP server using lwIP OK OK No
enet_uip
Simple uIP web server OK OK
No
gpio_jtag Switch between GPIO and JTAG OK OK OK
hello Simple console output OK OK OK
hibernate Hibernation No OK(*)
OK(*)
i2c_atmel i2c synchronous serial I/O to EEPROM OK OK OK
interrupts Demonstrate use of interrupts OK OK OK
kpad_lcd Keypad and LCD I/O using CPLD or GPIO OK OK OK
mpu_fault Memory Protection Unit OK OK OK
pwmgen Generate PWM using bit banging OK OK OK
rs232_485 RS232-RS485 switch No OK(*) OK(*)
sd_card microSD card using FAT file system OK OK OK
ser2enet Serial to Ethernet converter OK OK No
timers Timer interrupts OK OK OK
uart_echo UART interrupts OK OK OK
watchdog Watchdog example OK OK OK

(*) Requires the I/O Plus option

images/checkmark.gif

 

Application
Notes

Description

PDF
Write-up

Project Files

AN800

Getting Started with ImageCraft's ICCARM
and the MicroBolt

App Note 700

N/A

AN801

Hello World using Printf on the MicroBolt

App Note 701

AN802

Hello World on the MicroBolt

App Note 702

AN803

Blink the MicroBolt's onboard LED

App Note 703

AN804

Math examples for the MicroBolt

App Note 704

AN805

Digital I/O on the MicroBolt

App Note 704

AN806

PWM output on the MicroBolt

App Note 704

AN807

Real Time Clock Calendar on the MicroBolt

App Note 704

AN808

Analog to Digital Conversion with the MicroBolt

App Note 704

AN809

Timer Interrupts on the MicroBolt

App Note 704

AN810

Edge sensitive interrupts on the MicroBolt

App Note 704

AN811

Level sensitive interrupts on the MicroBolt

App Note 704

AN812

The MicroBolt as an I2C Slave

App Note 704

AN813

Using the Warchdog Timer on the MicroBolt

App Note 704

AN814

Using the MicroBolt Serial Debugger

App Note 704

AN815

JTAG debugging on the MicroBolt with the Nohau EMULARM

App Note 704

N/A

AN816

Pride Embedded Library for the MicroBolt

App Note 704

N/A

AN817

Accurate Delay Routines

App Note 704

AN818

I²C Master

App Note 704

AN819

I²C EEPROM

App Note 704

AN820

I²C GPIO Expansion

App Note 704

AN821

Low Power Modes

App Note 704

Shopping Cart

Your shopping cart is empty!